Matte and high-gloss HIPS granules for food packaging, home appliances and toys, supplied with consistent impact performance for injection moulding and extrusion.
MATERIALS INSIGHT · GON PLASTICS · 6 NOVEMBER 2026 · 1,060 WORDS · 6 MIN READ
High Impact Polystyrene remains one of the most cost-effective engineering choices available to a converter. It is easy to process, it finishes well, and its impact resistance is far above that of general-purpose polystyrene. The complication is that HIPS is not one product: a matte liner that hides scuffs in a refrigerator and a high-gloss surface that sells a toy on a shelf are produced from different grades, and substituting one for the other shows immediately on the finished part.
GON Plastics supplies a HIPS portfolio built around that difference, covering matte, high-gloss, extrusion and refrigerator liner grades, each tested under ISO and ASTM standards for stable processing and finished-part quality.
KEY TAKEAWAYS — Four core grades: GON825 matte, GON888G high gloss, SR600 and SRL700H liner grades — Impact and heat resistance levels matched to specific end products — ISO and ASTM testing on every grade before shipment — Steady demand across food packaging, appliances, electronics and toys |
Figure 1. High impact polystyrene granules from GON Plastics in matte and high-gloss grades for food packaging, home appliances and toys.
Diverse HIPS Grades Meet Differentiated Market Demands
Our HIPS product range includes GON825 in a matte gloss, GON888G in high gloss, and two specialised liner grades, HIPS SR600 and HIPS SRL700H, developed for refrigerator inner liners. The series covers multiple melt flow options and supports both injection moulding and extrusion production routes.
Within one family, three decisions shape the grade: the surface finish, the impact and heat resistance level, and the flow rate that suits the machine. Choosing correctly at the quotation stage is cheaper than correcting at the moulding stage.
Matte Grades for Low-Reflection Surfaces
GON825 is designed for applications that need a low-reflection surface. A matte finish does two things at once: it removes the glare that exposes flow marks and sink marks on large visible parts, and it hides the fine scratches that accumulate in service. For appliance liners, office and kitchen articles and large injection-moulded panels, that is a quality decision made at the material level rather than at the polishing stage.
High-Gloss Grades for Visible Consumer Parts
GON888G delivers a smooth, high-gloss appearance for visible consumer parts. High gloss is less forgiving than matte: any inconsistency in melt temperature, mould temperature or packing pressure reads as a streak or a flow line. The grade is built for the opposite case — where a converter wants a deep, even surface on a part the buyer will look at closely, such as a toy, a cosmetic housing or a display component.
Refrigerator Liner Grades
SR600 and SRL700H are liner grades, and refrigerator inner liners are one of the most demanding HIPS applications in white goods. A liner is thermoformed from sheet into a deep draw, then exposed to foaming pressure and to years of cold, humidity and food contact inside a closed cabinet. The grade has to draw without thinning into a hole, resist stress cracking at the corners and keep a surface that can be cleaned repeatedly. These two grades are positioned for that duty rather than adapted to it.
Figure 2. Typical HIPS end-use parts, from appliance liners and food packaging to consumer electronics housings and toys.
Standardized Performance for Reliable Mass Production
Each HIPS grade undergoes strict testing that complies with ISO and ASTM standards. For a processor, the value of that testing is not the certificate itself but the reduction in variables between one delivery and the next.
Toughness Compared with General-Purpose Polystyrene
Compared with general-purpose polystyrene, HIPS features greatly improved toughness and impact resistance. The difference comes from the rubber phase dispersed through the styrenic matrix, which absorbs energy instead of letting a crack run. This is why HIPS holds the middle ground in packaging and appliances: it processes close to GPPS on the same equipment, but it survives the drop, the stack and the handling that would fracture a GPPS part.
Matching Specifications Without Trial Costs
Grades with varied impact and heat resistance levels help processors match exact end-product specifications, cut trial costs and improve production efficiency. A converter who has to over-specify to be safe pays for toughness that the part does not need; a converter who under-specifies pays for it in rejects. Having several levels inside one family is what allows the specification to be met rather than exceeded.
Food-Contact Grades for a Growing Packaging Market
Food-contact suitable HIPS grades are well positioned for the expanding market of disposable food and dairy packaging. Cups, dairy tubs, trays and sheet-based disposable articles all depend on a material that can be formed thin, printed cleanly and used without affecting the contents. Compliance is a material property, not a converting step, which is why the grade has to be selected before the tool is cut.
Broad Application Landscape Drives Steady Market Adoption
HIPS resin is deployed across several downstream sectors that rarely appear in the same conversation, yet they share one requirement: a part that looks right and survives handling at a competitive cost.
Daily Goods
Office, kitchen and bathroom injection-moulded articles form the volume base of the market. These parts are produced in high cavities, decorated in-line and sold at low unit prices, so the material has to run fast and consistently rather than offer exceptional properties.
Food Packaging
Beverage cups, dairy packaging, sheets and disposable products make up the packaging side. Extrusion grades convert into sheet that is then thermoformed, which places the emphasis on melt strength, gauge consistency and a surface that accepts printing.
Electrical Industry
Internal parts and housings for home appliances and consumer electronics use HIPS where a rigid, well-finished enclosure is needed at a cost that a metal or engineering-resin solution cannot match.
Toys
Toys remain a steady outlet for high-gloss grades, where colour, surface and impact behaviour all matter and where the part is judged by a consumer in the first second of contact.
Global demand for HIPS stays stable, supported by the growth of consumer goods, cold-chain packaging and home appliance manufacturing. As a reliable HIPS supplier, we guarantee stable supply capacity and offer full technical support, including datasheets, formulation consultation and processing guidance for global converters.
Supplying HIPS at Scale
As a professional HIPS and GPPS manufacturer, GON Plastics supplies the GON brand high impact polystyrene range with stable capacity behind it. The grades are published individually, so a buyer can compare finish, flow and impact level before requesting samples, and our technical team can advise on the grade that fits a given mould, wall thickness and service condition.
For converters weighing a switch from GPPS to HIPS, or from a general grade to a liner grade, the practical starting point is the part drawing and the processing route rather than a price per kilogram. Visit our product pages to check full technical specifications for each HIPS grade, or contact our sales team for current availability and delivery terms.